ArcaOS 5.0 Русская версия
Пакет русификации ArcaOS 5.0 OS/2 давно доступен. Поддерживается любая версия: 5.0, 5.0.1, 5.0.2.

eCo Software может выпустить и другие пакеты (Немецкий, Голландский, Бразильский Португальский, Испанский, Шведский и т.д.)

If ACPI driver works on your computer ..

• fill the form for ACPI DB
• post a report to Hardware Database

• Hardware tested with eComStation: motherboards, moreover: notebooks, servers, netbooks
• Check ACPI DB - it contains filtered information

• Don't forget select in BIOS Setup: USB Legacy = disable
• enable ACPI support, enable APIC mode

• ACPI 3.14 -- recommended for notebooks -- BETAZONE
• ACPI 3.18 for eCS 2.0 GA -- good for motherboards manufactured after 2008 -- it is included to eCS 2.0 GA
• ACPI v.today -- available by eComStation subscription

How to switch between different version of ACPI? Use ACPI Fast Upgrade .wpi package - it replaces binary files.

• Disable USB controllers
• Disable audio, network, etc
• read ACPI documentation

Start the experiments from the beginning. If eCS PC works then enable one device and its drivers, try boot again.

• Uniaud - http://svn.netlabs.org/uniaud - yes, uniaud is usable now (2010/12)
• Genmac Wrapper - use official latest version

Do you use experimental drivers? beta versions of software? Recall full list of changes and buggy applications.

Resolve the conflicts related to IRQ

Note: The problems may occur if you are booting in PIC mode (1 CPU or N CPUs in SMP PIC mode). If use SMP APIC mode then IRQ problems are resolved automatically.

run in command line:
rmview.exe /irq > rmview.log

Example of rmview.log:

  IRQ Level =  0  PCI Pin = NONE  Flg = EXCLUSIVE    TIMER_CH_0
  IRQ Level =  1  PCI Pin = NONE  Flg = EXCLUSIVE    KBD_0 Keyboard Controller
  IRQ Level =  2  PCI Pin = NONE  Flg = EXCLUSIVE    PIC_1
  IRQ Level =  4  PCI Pin = NONE  Flg = MULTIPLEXED  SERIAL_0  Serial Controller
  IRQ Level =  5  PCI Pin = B     Flg = SHARED       Intel 82801DB-ICH4 with Analog Devices AD1981B
  IRQ Level =  8  PCI Pin = NONE  Flg = EXCLUSIVE    RTC

! IRQ Level =  9  PCI Pin = B     Flg = SHARED       UHCI Compliant USB Host Controller
! IRQ Level =  9  PCI Pin = A     Flg = SHARED       Intel 2200 Wlan
! IRQ Level =  9  PCI Pin = C     Flg = SHARED       UHCI Compliant USB Host Controller
! IRQ Level =  9  PCI Pin = NONE  Flg = SHARED       ACPI Interface
  IRQ Level = 10  PCI Pin = D     Flg = SHARED       EHCI Compliant USB Host Controller
! IRQ Level = 11  PCI Pin = A     Flg = SHARED       Intel 10/100/1000
! IRQ Level = 11  PCI Pin = A     Flg = SHARED       UHCI Compliant USB Host Controller
  IRQ Level = 12  PCI Pin = NONE  Flg = SHARED       AUX_0 PS/2 Auxiliary Device Controller
  IRQ Level = 14  PCI Pin = NONE  Flg = EXCLUSIVE    IDE_0 xATA Controller
  IRQ Level = 15  PCI Pin = NONE  Flg = EXCLUSIVE    IDE_1 xATA Controller

  IRQ Level = 44  PCI Pin = NONE  Flg = EXCLUSIVE    ACPI Interface
  IRQ Level = 45  PCI Pin = NONE  Flg = EXCLUSIVE    ACPI Interface
  IRQ Level = 46  PCI Pin = NONE  Flg = EXCLUSIVE    ACPI Interface
  IRQ Level = 47  PCI Pin = NONE  Flg = EXCLUSIVE    ACPI Interface

Check that:

• ACPI Interface is alone on IRQ9 (IRQ Level = 9)
• Uniaud is alone (no USB controllers on the same IRQ)
• Network adapter is alone (no USB controllers on the same IRQ)
• All Thinkpad notebooks have common problem if booting in PIC mode: all devices are using IRQ11 (this happens if you activate ACPI, i.e. boot ACPI.PSD; if don't enable ACPI then problem doesn't occur because old BIOS configures IRQs by itself). As result, sound doesn't work, network doesn't work, USB doesn't work.

• Method 1: setup IRQs via BIOS setup
• Method 2: use LINK command integrated to ACPI.PSD
• Method 3: disable the devices (disable unnecessary IDE controller, use onboard audio instead of external, etc)

Method 2: Lars Erdmann demonstrates how to use LINK option:

it's because the IRQ links are not properly set or set to a "forbidden" IRQ (like IRQ13 which is reserved for the Co-Processor). I think this affects only onboard devices. I had the same problem. What you need to do:

boot eComStation, capture the log of ACPI: copy acpica$ acpica.log (or find it in logs directory if the logging is activated)

in acpica.log look for a section like this:

8:5:44.0 IRQLinks found:
8:5:44.0 0: 'LNKB' (F9005488)  P[*3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:10.0 0:2.3
8:5:44.0                        A[]
8:5:44.0 1: 'LNKC' (F90056E0)  P[ 3, 4,*5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:7.0 0:2.7
...

If one of the sections does not have a "*" in the P[] section, this is the IRQ link that is not properly set up. You will have to assign an IRQ manually like this (in config.sys):

PSD=ACPI.PSD /LNK:LNKE:5 (example: set LNKE to IRQ 5, in your case I guess you could also set it to IRQs > 15 but I don't know).

Then you will get something like this (see the LNKE entry):

...
8:5:44.0  Set: 5 4: 'LNKE' (F9005B90)  P[ 3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:3.0
8:5:44.0                        A[]
8:5:44.0 5: 'LNKF' (F9005DE8)  P[ 3, 4, 5, 6, 7, 9, 10, 11,*12, 14, 15] <- 0:3.1
8:5:44.0                        A[]
8:5:44.0 6: 'LNKG' (F9006040)  P[ 3, 4, 5, 6, 7, 9, 10,*11, 12, 14, 15] <- 0:3.2
8:5:44.0                        A[]
8:5:44.0 7: 'LNKH' (F9006298)  P[]
8:5:44.0                        A[]

and all of a sudden you can use all USB ports (or whatever other device did not work).